hi-fi, studio and pro equipment

speaker components

books, magazines, periodicals

catalogs

photo & darkroom equipment

terms and conditions of sale

 

Part No.

Photo

Please click on pictures for larger view

Cond-ition

 

Price

 

hi-fi, studio and pro equipment

     

BX07-05

Sony TTS-4000 Turntable w/ SME arm

You are looking at  a Sony TTS-4000 turntable with an SME 3009 arm and Denon DL103 cartridge. These components are housed on a custom built solid walnut finished base.

This is a very rare opportunity to own a very special combination of classic components. These components were regarded as the state of the art in the 1970's - and are still very highly regarded today. I had purchased this equipment new from a professional broadcast supplier in the mid 1970's. I have stored this turntable since about 1985. You can find many articles on the Internet about each of these components. This system will out-perform many other current systems costing tens of thousands of dollars. This system served as a broadcast standard for many radio stations and studios. I have only seen two other TTS-4000's for sale in the past six years. They both sold for well over $ 2,500.

Turntable: Sony TTS-4000

Specifications:

System: aluminum die cast, 32cm / 1,75kg

Motor: Direct Drive Servo-controlled AC motor

Speeds: 33 1/3 & 45rpm

Pitch control range: ±3%

Wow&flutter: less than 0,03% RMS

S/N ratio: 60dB (JP spec) 62dB (DE spec) 65dB (DE spec, DIN 45544)

Full speed ahead: 1,8 s.

Componentry: 1 IC 7 transistors 11 diodes

Multivoltage: Yes

Weight: 8,5kg (JP spec) 18kg (DE spec!)

Dimensions: 33,5 x 33,5 x 12,9cm

Height above/below base: 3,7cm / 9,2cm

List price: 65,000¥ (1972)

Please check this site for information and manuals for the Sony TTS-4000 turntable.

 

http://www.vinylengine.com/library_model.php?make=Sony&selected_

model=TTS-4000

 

Tonearm: SME 3009 Series II Improved

Specifications:

The name SME was almost synonymous with the tonearm. Modern audiophiles are often more inclined towards the "3009 Series II Improved" model that is the same basic arm as the 3009, but has an integrated headshell minimizing resonance and lowering the effective mass to 6,5 grams. (you can get counterweights for the S2 improved series if you want to use heavier pickups). Original cost $295.

Please check this site for an enormous amount of information on the SME tonearm.

 

http://www.vinylengine.com/library_model.php?make=SME&selected_

model=3009

 

Cartridge: Denon DL-103D

"Low output, Moving Coil stereo cartridge. The greatly improved model in the 103 series, taking performance to the limit of the original 103 design. A high performance cartridge with a flat frequency response as high as over 65KHz and with high trackability at low stylus force owing to the greatly reduced effective mass of vibration system viewed from stylus point. The double-construction tapered cantilever has excellent stiffness properties. The improved tracing performance is giving you the power and dynamics of recordings at a scale you never thought possible. This was accomplished by an employment of a high-rigidity and extra thin double construction conical cantilever, and a solid diamond stylus tip of 0.1mm square section."

"The DL-103 is a high performance moving coil type stereo cartridge. Its outstanding performance has been recognized by many critics and audiophiles. Developed by Denon in collaboration with the Japan Broadcasting Corporation technical research laboratories as a high performance, high reliability phono cartridge for broadcasting purposes, the DL-103 has been in use for a long time in public and commercial AM and FM broadcasting stations."

Note: This is a used cartridge. To obtain the original (good) performance, you will need to replace the cartridge with a new one.

Specifications:

Frequency Response: 20-65,000 Hz

Separation: Greater than 28db

Recommended Tracking force: 1.5gms +- 0.2gms

Cantilever: Aluminum Tapered Pipe

Output: 0.2mv

Stylus Type: Elliptical Diamond

Stylus Radius: 0.1mm

Weight: 7.5gms

Original Price: $499

Please check this site for information and manuals for the Sony TTS-4000 turntable.

 

http://www.vinylengine.com/library_model.php?make=Denon&selected_

model=DL-103

 

The base and cover

The above components are mounted in a custom built base and cover. The sides of the base are made of solid 1/2in. walnut. The platter side is made of 3/4in. walnut veneered plywood. The bottom of the base is made of 3/4in. plywood. The cover is made of 1/2in. solid walnut and stained Plexiglas. The cover is normally hinged to the base. I took the cover off, because it is easier to operate the turntable without the cover on. The base sits on four adjustable composite/rubber feet. The base and cover have some minor scratches - which can be refinished quite easily.

Special Notes (and the fine print):

The Sony turntable, SME tonearm and Shure V15 cartridge were purchased and installed approximately 30 years ago (mid 70's). The Denon cartridge replaced the original Shure V15 around 1978. This system was used daily until around 1983. The turntable and tonearm are in excellent condition. The Denon cartridge needs to be replaced - which can be found by searching the Internet.

I will only ship the system disassembled and packaged in two large double packed boxes. This equipment is fragile to bumps and vibrations. I would not ship the system assembled as shown in the first photo. The system has only been moved a couple of times - and I will not leave it up to the shipping company's rough handling to damage this system on it's way to you. Again, I insist that the system be disassembled and packaged properly. The turntable will be in one box, and the base, cover and SME tonearm will be in a separate box.

That means that you will have to assemble the system when you get it. I have good news. It takes less that 45 minutes to mount the components and wire and setup the tonearm. The assembly is very straight ahead. Stuff can only fit and be plugged in one way. A copy of the assembly and setup manuals will be included. The only thing that will take some work will be refinishing the base and cover - if you thing it needs it.

You will notice that the SME tonearm is missing a finger lift. The finger lift was removed by the technician who originally assembled this turntable. He claimed that this reduced the mass of the tonearm - which is a good thing. I checked with SME to see if the finger lift was still available. They had none on hand. They suggested I speak with one of their engineers - or, look for a finger lift on the Internet. The arm is very useable without the finger lift.

Depending on where the turntable will be shipped to, the shipping costs will be calculated once I receive the shipping address. The two parcels will weigh approximately 30 pounds each. I will not ship this system - PERIOD - unless it is insured. I will let you know the shipping and insurance charges - once I know your destination.

Very

Good

  Offers

BX07-11

Yamaha CD-875 5 CD Exchange System

You are looking at a Yamaha CD-875 5 CD Exchange System. The optical output makes this system ideal for transferring sounds directly into Pro Tools or any other DAW.

ORIGINAL COST : $ 295.00

DIMENSIONS (inches, Length x height x depth) : 17.25 x 5 x 16

WEIGHT (lbs. / Kilos) : 12.8 / 5.825

THIS ITEM IS IN EXCELLENT CONDITION !!

Features:

5-disc Carousel Auto-Changer
Full Opening Disc Tray for changing 5 Discs at a Time
PLAYXCHANGE; Disc Changing Capability While Playing Another
CD TEXT Compatibility
Text Search
Random Access Programmable Play
Random-Sequence Play
Single Track/Entire Disc/All Disc Repeat Play
Adjustable Display Brightness
Remote Control Capability
Disc Scanning Capability Useful for Disc Searching or Disc Checking
CD Synchronized Recording With A Compatible Yamaha Tape Deck
Optical Digital Output
Automatic Programming for Recording To Tape
Disc/Artist Name Filing Capability
Favourite Tracks on Each Disc Filing Capability
Automatic Peak Level Searching Capability
Timer Play Option
Adjusting The Output Level
PHONES Jack

The CD player has minor scratches on top of the cover. Please see photo #5.

What's in the Box:
CD player, Remote control, and user's manual.

Very

Good

 

75.00

BX07-14

JVC TD-V711 Semi-Pro 3-Head Cassette Deck +More

You are looking at a JVC TD-V711 Semi-Pro Cassette Deck. This was one of a series of semi-pro cassette decks that Sansui produced in the late 1980's. I used this deck from 1988 to 1992 for making master cassettes. It has been sitting idle since then. This deck is built like a brick sh_t house. It is very well appointed - including wooden side panels. This is a great opportunity to obtain one of the better decks that were made before cassette became obsolete. The original manual is included with this auction.

ORIGINAL COST : $ 620.00

DIMENSIONS (inches, Length x height x depth) : 18.75 x 5.25 x 13.25

WEIGHT (lbs. / Kilos) : 18.4 / 8.3

THIS ITEM IS IN EXCELLENT CONDITION !!

Features (from the JVC manual:

Three design features that give higher sound quality:
· Direct Design – for direct input, NR DEFEAT circuit and D.D. motor.

· Digital-analog independent design isolates control and audio sections.

· Rugged construction design eliminates vibrations and resonance.

Equipped with direct input terminals, starts a new style of tape decks:
· In addition to it’s line input, two direct input terminals are provided.

Other Features:
· Closed loop dual capstan mechanism

· Independent three head system using SA (recording) and amorphous ferrite (playback) heads.

· Pulse servo capstan D.D. (direct drive) system.

· New materials used extensively; OFC (oxygen free copper) for PCB patterns and PCOCC (perfect crystal by Ohno Continuous Casting process) for head coils and signal wires, all of which transmit the original sound accurately.

· Dolby HX Pro headroom extension (with On/Off switch).

· MPX filter (with On/Off switch).

· Adjustable bias.

· Digital peak/peak level meter (with peak hold function).

· Auto tape select mechanism.

· Music Scan (under license from Staar SA Brussels, Belgium).

· Memory Stop.

· Digital tape counter (with remaining tape indication).

· COMPU-LINK-1/synchro terminal.

· Auto monitor.

· Timer Start.

· Gold-plated input/output terminals.

· All-stage DC amplification.

Please see photos # 5&6 for the actual specifications.

Very

Good

 

Offers

BX07-79

Harman Kardon Citation 12 power amp.

This HK amp works well and is in good condition for its age! There is a very low level hum - could use new caps. The paint only has a few minor scratches.  The lettering on the placard is very nice. If weight and heat dissipation were signs of quality, this amp would be the winner hands down. This amp weighs almost as much as my older tube-type Citation II. It is rated at 60 watts RMS per channel. It has very tight low end, and clear highs! Basically, this amplifier is sure to please.

Needs work   Offers

BX07-80

NAD 1700 Monitor Series tuner/preamp.

This tuner/preamp was their very best in the late 80's to mid 90's  (The equivalent of their Silver Series today). The 1700 is considered to be their first and best preamp/tuner, and it is a perfect example of the Monitor Series no compromise design.  The NAD 1700 has inputs for Phono (MM & MC), Tape 1 and Tape 2. It features bass EQ, Mono, Low Level, infrasonic filter (switchable) and 2-way tape dubbing.  The retail price of the 1700 was more than $800. Everything works flawlessly. All the lights work and the cosmetics are perfect except for one small (very hard to see) scratch on the top front plate.  You can see from the picture that the unit is missing a small plastic cap for the knob at the front. This does not affect the unit at all (can be ordered from NAD). There are also two RCA jacks on the back that need to be replaced. This preamp sounds very good.

Needs

Minor work

  Offers

BX07-81

Roland MPU-401 ISA Midi Interface.

The original interface for the IBM PC and compatibles. Unit is in NEW condition. I will include a printout of the original manual as well as the driver files on a CD.

 

A good link for setting up the card.

http://www.synthman.com/roland/support/supplementalnotes/

SUPNOTES/MPU401.html

Like

New

 

200.00

BX07-82

Denon DN-770 Dual Cassette Deck for Parts

Used deck for parts or repair yourself.

Deck can be repaired for around $150.  The only serious problems is related to the motor. A spring is also missing on one of the doors (a 25 cent part).

Description:
Dual well auto-reverse cassette deck • Amorphous head • Quick reverse with end-of-tape-to-leader detector • Dual Recording; 2 masters at once or A to B deck recording • Dubbing; normal or high speed • Independent recording/playback • ±12% Independent pitch control for deck A and B • Precision music search • Dolby B, C NR with Hx Pro • Auto tape selector • Relay play or record • Precision tape counter • Memory rewind • Single or continuous cassette cycle • Optional wired remote RC-770TW • FL peak hold level meter • Selectable headphone output; A or B • Unbalanced inputs and outputs • 3U rack spaces. 
Retail $550US

Needs

Repair

  35.00
           

 

speaker components

   

BX07-83

TWO Tannoy 3836 Dual Concentric Drive units.

THE PRICE SHOWN IS FOR TWO TANNOY 3836 SPEAKERS.

You are looking at a pair of Tannoy 3836 15 inch PcQ Point Source Dual Concentric Drive units. These are the drivers used in the commercial CPA15 system - and are identical in performance to the driver used in the System 15 DMT monitors which cost well over $5,000. The 3836 speaker is currently the most widely used Tannoy speaker on Broadway and on the London stage. This is due to its incredible performance, wonderful sound and reliability. These speakers were used as spares in a traveling Broadway production audio system for Phantom of the Opera. As you can see from the pictures, the speakers will need 2-way crossovers and enclosures. The following links have a very useful design for an enclosure and crossover network:

 

http://members.aol.com/emigrant/tannoy.htm

 

http://members.aol.com/emigrant/tannoy_waf_15.htm


Features:

15 inch PcQ Point Source Dual Concentric Drive units
HF waveguide for ideal spherical high frequency wavefront
User replaceable self-centering high frequency diaphragm
HF coil wound with ectangular section copper-clad aluminum wire
LF coil wound with rectangular section copper wire
Vented die-cast drive units chassis increases heat dissipation and power handling
Fatigue free sound
Thiel/Small Parameters

Model No. 3836
Vas, volume equivalent compliance 430 litres
Fs, free air resonance 27.4 Hz
Qt, total Q-factor 0.427
Qa, mechanical & acoustic Q 2.1
Qe, electrical Q 0.537
Re, voice coil resistance 5.5
Sensitivity (@2.83V, 1m, 20C) 94 dB
These Tannoys are designed to work well in relatively small and simple bass reflex enclosures. They will handle 600 watt peaks and are capable of very high output.

These speakers - without a doubt - are "the best high sensitivity speakers available for under $10,000." I have recently been in contact with a knowledgeable chap from NZ who owns a pair of these. He claims that these drivers are the same ones that were used in the $ 14,000 Tannoy Churchill speakers.
Dimensions (in) : 18 x 18 x 10 (cm) : 46 x 46 x 25 per speaker, boxed.  Weight (lbs) : 33 (kg) : 15 per speaker, boxed

Like

New

 

Offers

BX07-24

Jensen 10 inch Speaker C10PF 16 Ohm.

You are looking at a Jensen 10 inch full range speaker model C10PF. This speaker may be used as a low/mid speaker in a stereo system or as a guitar speaker.  THIS ITEM IS LIKE NEW

Shipping Dimensions (in) :  12 x 12 x(cm) : 30 x 33 x 20 boxed speaker Weight (lbs) :  7     (kg) :  3.4

Like

New

  offers

BX07-23

TWO Stanford Acoustics 12in LF Speaker 200w/rms.

You are looking at TWO NEW Stanford Acoustics DK1220 12in. drivers. This speaker has been designed for professional low / mid frequency mid power systems for sound reinforcement and guitar applications. This driver is extremely suited when extremely flat upper midband response is required.  A large magnet structure driving a 2.5 inch edge wound voice coil coupled to a reinforced cone, gives this driver the ability to produce very high sound pressure levels.  Usable high frequency response to 4000 Hz allows many choices of crossover points when used in high power 2-way systems. Two hundred watts continuous power handling and a 97 db at 1 watt means that impressive sound pressure levels can be achieved by this driver. The DK1220 driver is made in America to the strictest tolerance levels.

Features:

  • 12 inch Diameter

  • Cast Aluminum Basket

  • Treated Accordion Edge Surround

  • 2.5-Inch Edge Wound Voice Coil

  • 200 Watts Continuous

  • 8 Ohms

Original Cost: $125.00 each

Dimensions (in) :  14.5 x 14.5 x (cm) : 37 x 37 x 20 per speaker. Weight (lbs) :  13 and 3 oz      (kg) :  6.0 per speaker

New

  offers 

BX07-20

TWO Stanford Acoustics HF Titanium Diaphragms.

You are looking at TWO NEW Stanford Acoustics SM-107 1 inch titanium High Frequency diaphragms.

Features:

  • Titanium diaphragm

  • 1 3/4-Inch Edge Wound Voice Coil

  • 106 dB at One Watt Sensitivity

  • 50 Watts Continuous above 800 Hz

  • 8 Ohms

These diaphragms are new old stock (NOS) that was purchased quite a while ago for a customer that never finished the sale.

Original Cost: $55.00 each

Dimensions (in) : 3.75 x 3.75 x 3   (cm) : 9 x 9 x 7.5 both speakers

Weight (lbs) : 1    (kgs) : .4  both speakers

New

 
  offers 

BX07-84

TWO Stanford Acoustics HF CD Horns for Altec or JBL.

You are looking at TWO NEW Stanford Acoustics SH-360 1 inch High Frequency horns. These horns have been designed for professional high frequency systems for public address, recorded dance and monitoring applications. Usable response from 500 Hz to 16 KHz allows many choices of crossover points when used in high power 2-way systems. These horns will fit any one inch exit driver such as Altec or JBL. The SH-360 horn is made in America to the strictest tolerance levels.

Features

  • One inch Throat Diameter

  • Constant Directivity

  • 90 x 40 pattern

  • Glass Filled ABS

These horns are new old stock (NOS) that was purchased quite a while ago for a customer that never finished the sale.

Original Cost: $65.00 each

Dimensions (in) : 14.25 x 6.25 x 7 (cm) : 36 x 16 x 17.5 per speaker

Weight (lbs) : 2 (kgs) : 0.865 per speaker

New

  offers

BX07-85

Pair Goodmans XO-950 2-way crossover.

New old stock. Used in two or three-way systems. Crossover frequency 950hz, 6db/oct. Housed in plywood enclosure. Screw terminals.

 

New   40.00

 

         

BX07-31

Note: actual catalog is a  black and white scan.

Jensen Speaker Plans DIY 1956 Vintage Hi Fi.

You are looking at  a back-to-back high quality black & white reprint of the 1956 JENSEN speaker enclosure plans. Contents include "Selecting The Jensen Loudspeaker System Kit" - "About Loudspeaker Enclosure Construction" - "Jensen Imperial Reproducer, Free Standing For Corner or Sidewall (see picture 2)" - "Build-In Type Imperial Reproducer" - "A Bass Ultraflex Enclosure for 15-inch Speakers (my favorite Altec 604 enclosures, see picture 3)" - "Jensen Tri-Plex Reproducer, Free Standing and Build-In Types" - "Jensen Concerto-15 Reproducer, Free Standing and Build-In Types" - "A Bass Ultraflex Enclosure for 12-inch Speakers" - "Jensen Concerto-12 Reproducer, Free Standing and Build-In Types" - "A Bass Ultraflex Enclosure for 8-inch Speakers" - "Jensen Treasure Chest Duette Using The KDU-10 2-Way Speaker System Kit" - "Jensen Table Duette Using the KDU-11 2-Way Speaker System Kit" - "Jensen KDU-12 Budget Duette Low Cost 2-Way Speaker System Kit" - "Improving Speaker Systems with Jensen KTX-1 Range Extender Supertweeter Kit" - "Improving Speaker Systems with Jensen KTX-1 Range Extender Supertweeter Kit" - "How to Dress Up The Speaker Enclosure" - and - "Jensen Speakers and Speaker System Kits for Popular Commercial Enclosures.

All plans included here cover pretty much all areas of any speaker systems including full range, 2 way, or 3 way systems. These speaker enclosures are more sophisticated and more classic looking than Altec and JBL enclosures. Altec and JBL enclosures are too "industrial" looking and not home friendly antique looking like this JENSEN is. Total 36 pages. Measures 8" x 11". The reprint is very clear and sharp. No reserve. Happy bidding. The is a reprint (NOT THE ORIGINAL) and a great collectible and interesting reference for those passionate about early speaker cabinet design.

Dimensions (in) : 11 x 8.5 x .175 (cm) : 28 x 21.5 x 0.5

Package Dimensions : 36 x 26 x 2 cm packaged

Packaged Weight : 16 oz (kg) : <495 gm packaged

Like

New

  19.99

BX07-32

Karlson Speaker Plans DIY 1955 Vintage Hi Fi.

You are looking at a scanned image of an 8.5 x x5.5 in. 30 page booklet of the 1955 KARLSON speaker enclosure plans and articles. This is a great collection of articles from the 1950s on the very controversial design from John E. Karlson. Many DIY'ers are still building and modifying this design. A very good application these days is a bass guitar system using Electro-Voice speakers. A great collectible and interesting reference for those passionate about early speaker cabinet design.

Contents include:

Introduction to the Karlson Enclosure Hi-Fi Manual Enclosures and Cabinets Applications Radio and Television - The Karlson Speaker Enclosure by John E. Karlson (including full plans) January 1954 Karlson Data Sheet The Karlson Ulta-Fidelity Enclosure Kit by Robert Oakes Jordan Installation Instructions Loudspeaker Recommendations Karlson "12" - A new Karlson for 12 in. Speakers Price List Over 50 photos and illustrations

Dimensions (in) : 5.5 x 8.5 x .175 (cm) : 14 x 21.5 x 0.5

Package Dimensions : 36 x 26 x 2 cm packaged

Packaged Weight : 16 oz (kg) : <495 gm packaged

Like

New

  12.99

BX07-86

Magnavox Model 172 12in. loudspeaker

Very good condition for its age. 1300 ohms.

 

Used

  offers

BX07-87

Stentorian 10in. loudspeaker

Manufactured by Whiteley Electrical Radio Company. 3 ohms, like new.

Used

  offers

 

         

 

books, magazines, periodicals

   

BX07-73

Handbook Of Practical Electronic Tests And Measurements

John D. Lenk/HCWJ/ 1969/302pps/guide to the basic theory and application of every practical electronic test and measurement procedure for technicians. Unused condition/jacket has a bit of wear and a tear.

Product Details:Hardcover: 302 pages Publisher: Prentice Hall (February 1970) Language: English ISBN-10: 013380626X
ISBN-13: 978-0133806267

Used

  9.99

BX07-69

Audio Sound System Design & Installation.

Book by Philip Giddings that reveals the trade secrets of optimized performance of Audio Systems. Over 500 pages, use as a reference book to solve Problems related to such topics as grounding, power conditioning, pads, filters, Active Inputs, Rack systems, Interconnection practices, & many, many, more topics. Brand new never been read. Sells for 56 dollars at online book sellers. Get your new copy here for much less, and in new condition.

Used

 
  12.99

BX07-63

The First Book of Sound.

A basic guide to the science of acoustics.  An older book covering different topics with excellent illustrations.  By David C. Knight. Franklin Watts publishers 1960.  LOC 60-9786.  96 pages.

Used

 
  2.00

BX07-65

Two Books.  Basic Theory and Application of Electron Tubes.

Department of the Army and the Air Force Washington DC 1952.  216 pages soft cover.

Basic Theory and Application of Transistors.

Issued by the office of the Chief Naval Operations Aviation Training Division Washington 1960. Very detailed and well illustrated. Soft Cover 264 pages.  Two text books used in the 1950's and 1960's for training in electronics.

Used

 
  4.00

BX07-67

Loudspeakers Anthology.

This book is a anthology of reprinted articles on Loudspeakers from the pages of the journal of the Audio Engineering Society Vol. 1 to Vol. 25 1953 to 1977. over 400 pages of information, schematics, pictures graphs, and diagrams on vintage audio. Written by the who's who of speaker design and technology. Softcover.

Used

  15.00

BX07-74

Theory and Application of Electron Tubes.

Reich 1944 second edition. An older university text used in electronics engineering. Very detailed, well illustrated. Hard cover 716 pages

Very

Good

  9.99

BX07-68

Sound System Engineering.

Like the first edition, Sound System Engineering is a comprehensive text useful in the day-to-day work of-designing sound systems. It Is a practical manual that carefully examines a step-by-step method of accurately predicting such variables as acoustic gain, clarity of sound, and required electrical input power while plans are still on the drawing board. This approach can save your; clients thousands of dollars.

Written by a husband and wife team recognized as authorities in the field of audio engineering the book covers such topics as:

The history of audio Audio mathematics Using the decibel and matching impedance Interfacing electrical and acoustic systems Determining loudspeaker directivity and coverage The acoustic environment including large and small room acoustics Designing for speech intelligibility and acoustic gain Equipment, such as microphones, loudspeakers and loudspeaker arrays, and delay devices Audio and acoustic instrumentation Specifications

Emphasizing the time-energy-frequency analyzer, the authors discuss problems that might occur in a sound system as it evolves through design, installation equalization operation and maintenance.

The book contains 19 heavily illustrated, information packed chapters and 11 appendixes.

This accurate, complete, and concise too! is a necessary addition to the library of anyone involved in audio engineering.

Don and Carolyn Davis form a unique husband and wife team. They shared in the pioneer development of sound-system-room, equal- ization. Their company Synergetic Audio Concepts (Syn-Aud-Con), presents seminars in sound system design, installation, operation and maintenance techniques. Syn-Aud­Con is also a leader in audio consulting.

Chapters Included:

Audio Systems Mathematics for Audio Systems Using the Decibel Impedance Matching Interfacing Electrical and Acoustic Systems Loudspeaker Directivity and Coverage The Acoustic Environment Large Room Acoustics Small Room Acoustics Designing for Speech Intelligibility Designing for acoustic gain Microphones Loudspeakers and Loudspeaker Arrays Using Delay Devices Installing the Sound System Equalizing the Sound System Putting It All Together Specifications.

The book weighs approximately 3.3 pounds so ground freight to the US will be between $12 - $15. Canadian destinations will be less. Please email your postal code for a shipping quote. Insurance will be $1 and there will be a handling and packaging charge of $2.

Like

New

  19.99

BX07-88

This Business of Music and More About This Business of Music.

From Library Journal Published since 1964, This Business of Music is recognized as the industry textbook, and Krasilovsky, a music and copyright lawyer, offers broad and deep treatment of contracts, royalties, loans, tax issues, videos, and copyright. The new edition presents the industry in four parts: an overview, the record industry, music writers and publishers, and other aspects of the business. The coverage of technology makes sense of recent and coming changes to the laws affecting the industry, the new music delivery mechanisms, and the impact on the organizations that oversee performance rights. The writing is clear, and Krasilovsky presents complicated legal, financial, and strategic information without oversimplifying. An exceptionally rich appendix reprints important primary-source documents. Both books are excellent references that improve and expand upon the earlier editions. More About will be most appreciated by performers and writers, while This Business will be helpful to those who work on the business side. DJoan Pedzich, Harris Beach & Wilcox, Rochester, NY

This Business of Music contains 38 very readable, information packed chapters and 27 appendixes. More about This Business of Music contains 8 chapters and 32 appendices.

This accurate, complete, and concise tool is a necessary addition to the library of anyone involved in the music business.

These books weigh approximately 3.3 pounds so ground freight to the US will be between $12 - $15. Canadian destinations will be less. Please email your postal code for a shipping quote. Insurance will be $1 and there will be a handling and packaging charge of $2.

Very

Good

  9.99

BX07-89

The Theory of Sound - Volume One, Volume Two.

"These books, published first in 1877, contain the fundamental and basic theory for all those who work with vibrations and acoustics. The first book covers mechanical vibrations and the second book covers sound. Rayleigh's principle was published here." The book contains 12 heavily illustrated, information packed chapters. These books are new. It has never been used, but is slightly discolored from sitting on a shelf all its life.  The cover and insides are in excellent condition.

These books weigh approximately 2.25 pounds so ground freight to the US will be between $11 - $15. Canadian destinations will be less.  Please email your postal code for a shipping quote. Insurance will be $1 and there will be a handling and packaging charge of $2.

Like

New

  9.99

BX07-70

Psychology of Music, Music, Sound and Sensation.

You are looking at TWO Music / Sound Engineering & Acoustics Technical Books. These books are very current and are still published. Standard study by founder of Seashore test. Relationship between physical phenomena of sounds and our perception of them. Music as a medium, physical acoustics, auditory apparatus, sound perception, host of other topics. 88 figures. "The thinking is rigorous and objective"—Music Teacher (London).

A modern exposition, applying the findings of technical researches in acoustics to the practice of music, covering many different aspects of psycho acoustical researches. Fritz Winckel surveys extensively the German and English literature in the field, organizing his information into chapters on stationary sound, the onset behavior of sound, the concept of space, the concept of time, the evaluation of sound through the hearing mechanism, unclarity in musical structures, simultaneously sounding tones, electro acoustic sound structure and the effect of music on the listener.

These books are new. It has never been used, but is slightly discolored from sitting on a shelf all its life.  The cover and insides are in excellent condition.

These books weigh approximately 1.75 pounds so ground freight to the US will be between $8 - $12. Canadian destinations will be less.  Please email your postal code for a shipping quote. Insurance will be $1 and there will be a handling and packaging charge of $2.

Like

New

  9.99

BX07-90

Music, Physics and Engineering, The Physics of Music.

You are looking at TWO Music / Sound Engineering & Acoustics Technical Books.  This extraordinarily comprehensive text, requiring no special background in physics, math or music, discusses the nature of sound waves, musical instruments, musical notation, acoustic materials, elements of sound reproduction systems—from the telephone to stereo sound systems—and electronic music. "Very thorough, and full of well-presented facts."—Musical Times. 376 figures.

The book contains 10 heavily illustrated, information packed chapters.

This accurate, complete, and concise too! is a necessary addition to the library of anyone involved in sound.

This classic work deals in a nonmathematical way with the interface between physics and music. There is a general introduction to wave motion and sound--its generation by vibration and the its reception by the ear and the brain. The sections that follow discuss consonance, dissonance, characteristic sounds of major instruments, the mechanical reproduction of music, and acoustics.

These books weigh approximately 1.75 pounds so ground freight to the US will be between $8 - $12. Canadian destinations will be less.  Please email your postal code for a shipping quote. Insurance will be $1 and there will be a handling and packaging charge of $2.

Like

New

  9.99

BX07-91

What Is Midi, Digital Sampling of Sounds.

You are looking at TWO technical synth / MIDI books. These books are very current and are new condition. What is MIDI is a Special Focus Guide from the pages of using MIDI, a previous volume in the Keyboard magazine Library for Electronic Musicians. The book contains 7 heavily illustrated, information packed chapters. This accurate, complete, and concise tool is a necessary addition to the library of anyone involved in electronic music.

The second book is a sampling guide that was sold by Akai when they introduced the S900 sampler. This book is so unusual that it contains no table of contents, index or chapters. It is pretty well free form in layout and subject matter. The articles are very well illustrated full of easy to understand examples and diagrams.

These books weigh approximately 1.5 pounds so ground freight to the US will be between $8 - $12. Canadian destinations will be less.  Please email your postal code for a shipping quote. Insurance will be $1 and there will be a handling and packaging charge of $2

Like

New

  7.99

BX07-71

Midi for Musicians, Microphones, A Musicians Guide to the Road.

You are looking at THREE technical MIDI / sound / music industry books. These books are very current and are new condition.

The first guide that clearly explains the impact that Musical Instrument Digital Interface has made on the creation of music. Profusely illustrated with easy-to-understand diagrams and examples that take the mystery out of MIDI. The book contains 9 heavily illustrated, information packed chapters and 4 appendices.

Second book - This accurate, complete, and concise tool is a necessary addition to the library of anyone involved in electronic music. A wonderful book covering the subject of microphones and their use. The book contains 8 very full and well illustrated chapters as well as a glossary.

Everything you want to know about taking an act on the road. Tips on how to make every musical tour a success. The book contains 6 very full and well illustrated chapters as well as 4 appendices.

These books weigh approximately 2.2 pounds so ground freight to the US will be between $8 - $12. Canadian destinations will be less.  Please email your postal code for a shipping quote. Insurance will be $1 and there will be a handling and packaging charge of $2.

Like

New

  9.99

BX07-64

JBL Sound System Design Reference Manual.

Based on the Sound Workshop manual introduced in 1976 by George Augspurger and used to train JBL commercial sound installers. Very thorough and easy to follow. Many useful charts and diagrams.  JBL 1982 P584.

Like

New

  12.99

BX07-66

Theatrical Design and Production.  Introduction to Scene Design and Construction, Lighting, Sound, Costume and Make Up (Hardcover, 500 pages) J. Michael Gillette.  Mayfield Publishing Company 1987 0-87484-578-5.

Table of Contents:

1. Production Organization and Management
2. The Design Process
3. Theatre Architecture
4. The Stage and Its Equipment
5. Style, Composition, and Design
6. Color
7. Scenic Design
8. Tools and Materials
9. Scenic Production Techniques
10. Scene Painting
11. Stage Properties
12. Lighting Design
13. Electrical Theory and Practice
14. Lighting Production
15. Projections
16. Costume Design
17. Costume Construction
18. Makeup
19. Sound Design and Technology
20. Mechanical Drafting
21. Perspective
22. Drawing and Rendering
Appendix A: Listservs for Theatre Production
Appendix B: Revised Standard Graphic Language for Lighting Designers
Glossary Selected References Index

Book Description:
This is a comprehensive survey of the technical and design aspects of play production, including scene design and construction, lighting, sound, costume, and makeup. Health and safety precautions for the backstage crew appear throughout in boxes labeled 'Safety Tips,' and 'Design Inspiration' boxes show how professional designers create the desired look.

Good   9.99

BX07-72

Guide to Old Radios: Pointers, Pictures, and Prices (Guide to Old Radios) (Paperback) by David Johnson, Betty Johnson (Authors)

Paperback: 296 pages Publisher: Wallace-Homestead Book Company; 2 edition (November 1995) Language: English
ISBN-10: 0870697404 ISBN-13: 978-0870697401
Product Dimensions: 9.9 x 7 x 0.7 inches Shipping Weight: 1 pounds

"If your tastes run the gambit from crystal sets to early tube sets and novelty items, check out this Guide. Plenty of history and tips, lots of photos, and some listings with prices and manufacturing dates. Plenty of cool old ads too. An intriguing trip through the early days."

Fair   5.99

BX07-77

Tube Substitution Handbook Vol. 15

(Teledyne, Vol. 15) (Paperback)

Product Details: Paperback: 96.0 pages Publisher: Howard W. Sams & Co. Inc.; 15th edition (1972) Language: English ISBN-10: 067220889X
ISBN-13: 978-0672208898

Very

Good

  15.99

BX07-76

Magnetic Recording

(Hardcover) by Charles E. Lowman (Author)

A very good book on the subject. Very well illustrated. Easy to read.

Product Details: Hardcover: 320 pages Publisher: McGraw-Hill Education (December 1972) Language: English ISBN-10: 0070388458 ISBN-13: 978-0070388451.

Very

Good

  5.99

BX07-75

eBay the Smart Way:

Selling, Buying, and Profiting on the Web's #1 Auction Site, Second Edition (Paperback) by Joseph T. Sinclair (Author)

Review: "Particularly in the area of selling on e-Bay auctions, Sinclair answered ALL my questions ... great answers to questions about selling that hadn't even occurred to me to ask. Whether you expect that your e-Bay experience will be a one-shot deal or you are going into an on-line marketing business, this book will be a great resource.

Product Details: Paperback: 560 pages Publisher: American Management Association; 2nd edition (March 15, 2001)
Language: English ISBN-10: 0814471188 ISBN-13: 978-0814471180
Product Dimensions: 9 x 7 x 1.8 inches Shipping Weight: 2.3 pounds

Like

New

  4.99

BX07-92

AUDIO Magazine 1972 25th Anniversary Issue.

Excellent condition May 1972 [only flaw is the mailing label on the cover]. Started in 1947 as Audio Engineering .. AUDIO was [and maybe is] the most respected publication in the field.

This magazine was published monthly. Includes many interesting articles, reviews and photos.

  • Hi-Fi for beginners

  • Men of Hi-Fi

  • Four Channel Broadcasting

  • A large number of equipment reviews

  • A variety of advertising photos and descriptions

  • Various other informative articles

The magazine contains 108 pages and measures 8.5" x 11". There are dozens of black & white photos. This is the original (not reprint) and a great collectible and interesting reference for those passionate about early audio.

Good   9.99

BX07-44

High Fidelity & Audiocraft March 1959

You are looking at a March 1959 edition of a very high quality music publication. The magazine contains 148 pages of delightful articles, photos and specs. This is a very useful reference for people collecting or just enjoying looking at equipment from the past. Also included are dozens of advertisements. This is an invaluable source of hi-fi history.

See Photo #2 for Index

Dimensions (in) : 11.25x 8.5 x .25 (cm) : 29 x 21 x .6

Package Dimensions : 36 x 26 x 2 (cm) packaged

Packaged Weight : 15 oz (kg) : 420 gm packaged

No. of Pages : 148 Cover : Good shape - a bit worn and dog-eared

Inside : Slightly yellowed Readability : Very Good

Good   8.99
 

catalogs

   

BX07-46

Bogen Catalog P949

This is a magazine size 20 page photo catalog from the late 1940's of Bogen Sound Equipment like: BOGEN E75 70 WATT dual 35 Amplifier and system, Bogen HX 50 High Fidelity 50 WATT Amplifier and system, BOGEN F30 30 watt amplifiers and system with built-in phonograph, BOGEN-SHURE 710 Crystal Microphone, ASTATIC JT 30 CRYSTAL Microphone, AMERICAN D8t High Impedence Dynamic microphone, BOGEN-SHURE 737A Super-Cardioid Crystal microphone, and the AMERICAN D9T High Impedence CARDIOID DYNAMIC Microphone, plus much much more.

Very

Good

  9.99

BX07-38

NEWARK ELECTRONICS Vintage Catalog #67 - 1967

You are looking at a 1967 Newark Electronics general catalog. Newark was and still is one of the most popular sources of electronic components and parts and test equipment.  This catalog includes public address components, test equipment, parts and almost anything else that had to do with servicing and kit building.

 

The catalog contains almost 700 pages of photos and specs.  This is a very useful reference for people collecting or just enjoying looking at equipment from the past. Also included are hundreds of photos and thousands of specs and prices. This is an invaluable source of electronics and public address history.

 

Dimensions (in) :  9.625 x 7 x .875        (cm) : 24.5 x 18 x 2.5

Package Dimensions :  36 x 26 x 2.5 (cm) packaged

Packaged  Weight :  1 lb. 11 oz      (kg) : 775 gm  packaged

 

No. of Pages : 690Cover : Good Inside : Slightly yellowed

Readability : Very Good

Good

  9.99

BX07-45

B&K Precision Test Equipment Audio & TV

You are looking at a 197? B&K test equipment catalog. This catalog includes specs on the various models produced by one of the more popular test equipment manufacturers.

The catalog contains 24 pages of delightful photos, drawings and specs.  This is a very useful reference for people collecting or just enjoying looking at equipment from the past. This is an invaluable source of electronics, radio and hi-fi history.

Included Equipment:

  • Color Generators

  • F.E.T. VOMs

  • Sweep/Marker Generator

  • Transistor Testers

  • Triggered Sweep Scope

  • Tube Testers

  • TV Analyst

  • Accessories

    Dimensions (in) :11x 8.5 x .25(cm) : 28 x 21.5 x .6

Package Dimensions :  36 x 26 x 2 (cm) packaged

Packaged  Weight :  15 oz      (kg) :  480 gm  packaged

No. of Pages : 24 Cover : Good shape  - came folded from factory

Inside : Very Good Readability : Very Good

Good

  15.00

BX1111

 

Dynaco Hi-Fi Output Transformers Design Guide.

You are looking at a high quality scanned 196? Dynaco transformers catalog. Known as the premier hi-fi kit supplier of their time, Dynaco equipment was very popular with cost conscious hi-fi buffs. Many of the kits were way ahead of their time - especially when you consider the high quality and reasonable prices. This catalog includes specs on the transformers, schematics of some of their amplifiers and preamps, and other general design information.

The catalog contains 8 pages of delightful photos, drawings and specs.  This is a very useful reference for people collecting or just enjoying looking at equipment from the past. This is an invaluable source of electronics, radio and hi-fi history.

Included Schematics:

  • Dynaco MK III Amplifier

  • Modern Version of Williamson Amplifier

  • Mullard 30 watt Amplifier

  • Dynaco 120 watt Amplifier

  • Dynaco Mark IV Amplifier

  • Dynaco Stereo 70 Amplifier

  • Dynaco PAS-3X Preamplifier

  • Dynaco PAM-1 Preamplifier

Dimensions (in) :  11x 8.5 x .25        (cm) : 28 x 21.5 x .6

Package Dimensions :  36 x 26 x 2 (cm) packaged

Packaged  Weight :  15 oz      (kg) :  480 gm  packaged

No. of Pages : 8

Like

New

 

6.99

BX07-49

Heathkit Catalog Fall 1978

You are looking at a 1978 Heathkit general catalog. Known as the premier kit supplier of their time, Heathkit equipment was very popular with HAM Radio people, repair technicians and Hi Fi buffs. Many of the kits were way ahead of their time - especially when you consider the high quality and reasonable prices. This catalog includes home hi-fi components, test equipment, Radio equipment, parts and almost anything else that had to do with servicing and kit building.

The catalog contains 96 pages of delightful photos and specs. This is a very useful reference for people collecting or just enjoying looking at equipment from the past. Also included are hundreds of photos, specs and prices. This is an invaluable source of electronics, radio and hi-fi history.

Dimensions (in) : 9.5 x 8.25 x .25 (cm) : 24 x 21 x .6

Package Dimensions : 36 x 26 x 2 (cm) packaged

Packaged Weight : 15 oz (kg) : 480 gm packaged

No. of Pages : 102 Cover : Very Good shape - almost no wear

Inside : Good Readability : Very Good

Good

 

9.99

BX07-50

Heathkit Catalog Fall 1979

You are looking at a 1979 Heathkit general catalog. Known as the premier kit supplier of their time, Heathkit equipment was very popular with HAM Radio people, repair technicians and Hi Fi buffs. Many of the kits were way ahead of their time - especially when you consider the high quality and reasonable prices. This catalog includes home hi-fi components, test equipment, Radio equipment, parts and almost anything else that had to do with servicing and kit building.

The catalog contains 104 pages of delightful photos and specs. This is a very useful reference for people collecting or just enjoying looking at equipment from the past. Also included are hundreds of photos, specs and prices. This is an invaluable source of electronics, radio and hi-fi history.

Dimensions (in) : 9.5 x 8.25 x .25 (cm) : 24 x 21 x .6

Package Dimensions : 36 x 26 x 2 (cm) packaged

Packaged Weight : 15 oz (kg) : 480 gm packaged

No. of Pages : 104 Cover : Very Good shape - almost no wear

Inside : Good Readability : Very Good

Good

 

9.99

BX07-40

HEATHKIT March, 1966 Catalog

You are looking at a 1966 Heathkit general catalog. Known as the premier kit supplier of their time, Heathkit equipment was very popular with HAM Radio people, repair technicians and Hi Fi buffs. Many of the kits were way ahead of their time - especially when you consider the high quality and reasonable prices. This catalog includes home hi-fi components, test equipment, Radio equipment, parts and almost anything else that had to do with servicing and kit building.

The catalog contains 48 pages of delightful photos and specs. This is a very useful reference for people collecting or just enjoying looking at equipment from the past. Also included are hundreds of photos, specs and prices. This is an invaluable source of electronics, radio and hi-fi history.

Dimensions (in) : 11x 8.5 x .25 (cm) : 27.5 x 21 x .6

Package Dimensions : 36 x 26 x 2 (cm) packaged

Packaged Weight : 17.4 oz (kg) : 490 gm packaged

No. of Pages : 48 Cover : Good shape - a bit worn and yellowed

Inside : Slightly yellowed Readability : Very Good

Good

 

9.99

 

         

 

 

test equipment and tools

     

BX07-17

Heathkit IM-16 Desktop VOM

You are looking at a Heathkit Model IM-16 VOM. This is a basic measuring device required for most builders and experimenters.

ORIGINAL COST (approximate): $ 150.00 in 1975

DIMENSIONS (inches) : 6" high x 16.5" wide x 7.5" deep

WEIGHT (lbs. / Kilos) : 7.75/ 3.5

THIS ITEM IS IN GOOD WORKING CONDITION !! There is normal wear on the exterior and on the meter face.

This is a hard to find HeathKit model # IM-16 Volt/Ohm Bench Meter. It features a large analog dial readout and handy carrying handles. This solid state bench meter is perfect for all your testing needs. Controls are: voltage control (.5, 1.5, 5, 15, 50, 150, 500, 1500), ohm control (rx1, rx10, rx100, r1k, r10k, r100k, r1meg) off, line batt control, AC, DC-, DC+, Ohms control and a zero Ohms adjust knob. The probe input is on the lower right hand side of the Vom.

Good   45.00

BX07-93

Heathkit IG-18 Audio Sine/Square Generator.

These are very nice Heath solid state audio generators .. easy to use and provide a clean, stable audio output at a healthy level if required. This one has a problem with the outer case finish but the panel is nice and with minor effort it would be a good looking instrument. No clue what caused that spotted effect .. it's not rust! Generator works fine into an amp .. I have not looked at the signal with a scope]. Unit measures 13" X 5" X 7" deep and well packed shipping weight will be 13 pounds.

Fair   35.00

 

         

 

photo & darkroom equipment

   

 

THE CRAFT OF PHOTOGRAPHY. A complete, systematic course in black-and-white technique for beginners and advanced students alike. "Vestal accomplishes his announced intention-that of providing a comprehensive guide-with quite extraordinary lucidity. The result is best described by that classical reviewer's expression, 'I found myself unable to put the book down.'.. This book is a true manual." -W. L. Broecker, Exposure 

"If there are things about black-and-white photography that David Vestal has not revealed in his book, we can't imagine what they are. Vestal tells us in nearly 400 densely packed pages everything you need to know about cameras, lenses, light meters, dark­rooms, films, and all the esoterica that go into producing a fine photograph."-MBA

"This is one of the best basic books on photography avail­able.... Vestal's technical explanations ... help the reader with a multi-dimensional view of what he is doing and why." -Jack Manning  Camera View, The New York Times

Very

Good

 

6.99

 

62mm lens filters. You are looking at EIGHT (mostly Hoya) 62mm lens filters - as follows: 80A, 80C, 81A, 85B, R(25A), YA2, Polarizing Filter, UV (0)

This package weighs approximately 1.0 pounds so ground freight to the US will be between $5-7. Canadian destinations will be less. Please email your postal code for a shipping quote. Insurance will be $1 and there will be a handling and packaging charge of $4.

Like

New

 

Offers

 

Olympus 49mm F1.8 Lens w/3 Lens Filters. You are looking at one Olympus 49mm F1.8 Lens w/3 Lens Filters - as follows: 80A, O2, Y2

This package weighs approximately 1.0 pounds so ground freight to the US will be between $5-7. Canadian destinations will be less. Please email your postal code for a shipping quote. Insurance will be $1 and there will be a handling and packaging charge of $4.

Like

New

 

Offers

terms and conditions of sale                                           

Please do not make an offer unless you intend to follow through and you have read and agree with all of the terms and conditions stated below.

 

All the item(s) on this page are my own personal property and have been well looked after. These items are sold AS IS and ALL SALES ARE FINAL. All the items have been thoroughly examined and/or tested. I have stated their condition as accurately as possible.

 

All prices – including insurance and shipping are in US dollars.

 

Payment must be received by me no later than seven days from the date of offer acceptance.

 

Please ask all your questions before making an offer and give me enough time to respond to the questions.

 

Your offer will be reviewed and I will get back to you within 36 hours of receiving your offer.

 

Payment Options:

I accept Paypal,  bank draft, cashier’s cheque or international postal money order. NOTE: I do not accept the green USPS money orders – they are not negotiable in Canada. The orange USPS money orders are fine. If you use Paypal, and I get email confirmation, I will ship immediately. If paying by Paypal, please use the following email address as the Paypal ID:

When you finish the transaction it should state “Transaction Completed”. If it states “Payment Waiting To Be Accepted”, then you have probably made an error in the email address. If that is the case, you will have to re-enter the transaction. If you are paying by cashier’s cheque or money order, please include the shipping address, item number and description, your email address and phone number. I will notify you upon receiving your payment.

Shipping, Handling, Customs and Insurance

Items purchased may be picked up by prior arrangement.  Please call 204-586-6144 to arrange the pickup time.

Please note: you are responsible for paying ALL shipping, customs duties / taxes and insurance where applicable. If I need to prepay any of these charges, I will contact you and arrange for pre-payment.

You will be notified of the shipping costs after the confirmation of the sale – once I have your postal or zip code. If you need to know the shipping beforehand, please email me. Shipping charges will be rounded to the nearest dollar.

I use Canada Post Parcel Services and Fedex for most of my shipping. If you would like a different method – that can probably be arranged at additional cost. UPS ground will only be used if any items exceed the weight and/or size limitations of Canada Post. International shipments by UPS have hidden costs such as customs brokerage, duty or other fees. You are responsible for any hidden fees from any carriers other than Canada Post.

All items valued at more than $25 must be insured. I will let you know the cost of insurance separately. If you decline to insure the item(s), I will not be held responsible for any loss or damage.

The average transit time between the Canada and the US is 5 to 10 business days for USA Expedited Parcel (used for parcels over 2.2 pounds), and three to four weeks for USA Small Packet Service ground (used for parcels under 2.2 pounds). USA Small Packet Service air is also available – and usually takes 5-11 business days. Online tracking of parcels is available for USA Expedited Parcel at Canada Post. I can combine items to reduce shipping costs if they are to be shipped on the same day to the same location. You can calculate your approximate shipping costs at this

CANADA POST LINK:

http://www.canadapost.ca/business/tools/rc/bus/bin/rc_bus_us-e.asp

My postal code is: R2W 3Y4

To convert Canadian to American dollars for shipping see this link:

http://finance.yahoo.com/currency/convert?amt=1&from=CAD&to=USD&submit=Convert

Item(s) will be shipped 3 business days after payment has been received and confirmed by my bank. I will let you know when the item(s) has been shipped.

If damage is noticed to the package or to the item(s) you must keep all original packing materials and contact me immediately.

There is a packaging and handling fee of $2-4 for books, $2 for magazines, catalogs, brochures and $6-10 for speaker and electronic items.

PLEASE WATCH FOR NEW ITEMS BEING ADDED REGULARLY !!

 

 

 

website design by henry kreindler

HKA10300

© copyright 2007,  henry kreindler